Since I bought my bike (grizzly 700 2008 eps), I'm facing the problem with the handlebar, because the column has a front and back (radial) play. I changed there a bush with a new one (1UY-23812-00-00) and the still problem persists. What else could I check?
Thanks in advance!
I have a 2007 grizzly 700
The bike was sitting for a 2 weeks after a 4 day ride ran great at planet bamboo in Florida
The bike the last day snapped a ball joint I drove the bike on and off the trailer
2 weeks later the bike would not power up the fuel programmer. It will crank but not start
Hey what’s up guys I’m new to the forum I have a grizzly 660 that will not idle correctly once it warms up it does run decent and will idle “kinda” but when cold I have to hold the throttle or choke on the problem with that is it hard to get into gear and when it does it’s a hard clunk it’s...
At my wits end! Bike has had a wobble in front brake handle since I bough it 8 months ago.
I inspected and found one loose ball joint, one worn bearing and possibly a slightly warped rotor all on right front wheel. Replaced bearing, rotor and ball joint. Wobble STILL there! As far as I can...