Yamaha Grizzly Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
701 Posts
Discussion Starter #1
Quick question...currently I have my winch spliced into the accessory outlet. I want to add my heated grips, but I'm not sure splicing them into that same wire. Is there another I should tie into? Headlights, tailight, dash? Reason being is that I also plan on getting a spotlight to use while plowing and that plugs into the accesory outlet. I think I'd be overloading the accesory with heated grips, winch, and spotlight? Thoughts? If so which wire should I look for and what color under the hood.

Koko
 

·
Premium Member
Joined
·
786 Posts
not sure if you want to go to the trouble,, but at most automotive stores you can get a cheap fuse block,, just run your hot from the batt. then a ground to the block and you can hook different things up to it and have them all fused,,,, kinda makes for a cleaner setup and a lot easier to find a problem if something happens down the road,,,,,,, ,,,, ,,,, ,,,,, cg
 

·
Registered
Joined
·
462 Posts
just but a 2 dollar tester,and find a hot wire that is only hot while the key is on,and a 15 cent clamp on wire splice
 
1 - 4 of 4 Posts
Top