Yamaha Grizzly Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
33 Posts
Discussion Starter · #1 ·
does anyone have the measurements for the front end, i want to check mine and make sure its riding straight and neither tire is turned in or out so no tires get scrubbed off.
 

·
Registered
Joined
·
339 Posts
The specs for toe-in is 0.00" to 0.39" of toe-in with the weight off of the machine.

I have found that my Grizz handles much better with no more than 0.25" of toe in measured with the Grizz setting on the ground. I raise it up to adjust then set it down, work the suspension up and down, roll it forward and back, then take the measurement while it is on the ground.
 
1 - 2 of 2 Posts
Top