Yamaha Grizzly Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hey yall, I'm having an issue lining up a new rear left axle into a knuckle on my 03 Yamaha Grizzly 660. I cannot push in both knuckle bolts that go through the lower and upper control arms. The new axle was bought on Amazon (https://www.amazon.com/gp/product/B00T6T18H0/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1). I was able to put in the right side axle without a problem but the left side is giving me trouble. I know the left side axle is supposed to be longer than the right side axle. I tried hammering in the axle and flexing the joints multiple times with the axle out and still had no luck. Just to make sure the new axle was correct fitment, I put the old axle back in and THE KNUCKLE STILL WOULD NOT LINE UP!!

I desperately need help with this! The quad was sitting for years and I was able to revive it to about 80% (still needs a bit more work). But this axle issue is holding me back.
Does anyone know a solution to this issue??
 
1 - 1 of 1 Posts
Top