Yamaha Grizzly Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
1,337 Posts
Discussion Starter #1
Hi koko,

I can remember a while ago you posted a problem with broken winch cable from the snow plow, well warn seem to have come up with a sollution.

Take a look at: http://www.warn.com/atv/plows/roller_fairlead.shtml

I hope this helps!!
 

·
Registered
Joined
·
701 Posts
Nice memory! You're right I did snap my cable last winter and replaced it with a synthetic rope. I was going to cut down the broken cable and reuse that, but I may go this short synthetic rope way. Thanks for the link!
 

·
Registered
Joined
·
1,337 Posts
Discussion Starter #3
Koko, did you see the roller fairlead ? this upgrade has increased the size of the lower roller by at least 3 times!!

That would stop the cable breaking by itself!!
 

·
Registered
Joined
·
701 Posts
Gotcha, I'm not sure that the roller was my problem. I believe it was two things. One, the cable would not wind back just right and it pinched and bent the cable causing it to fray. But thats not where my cable broke. It actually broke right at the loop where you place the hook.
 
1 - 4 of 4 Posts
Top