Yamaha Grizzly Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
18 Posts
Discussion Starter #1
What things are you guys using to increase power, torque, etc. So far I have a stage one jet kit, hmf exhaust, k&n filter, and a high lifter outlaw clutch kit{it's made by epi}. I haven't got everything installed yet but Im hoping it will make a difference. There is a rincon that rides with me that has all of this done and he can spank anybody around. I am trying my hardest to produce a machine that is tougher, I can't have a rincon showing up my grizz.
 

·
Registered
Joined
·
3 Posts
Hey John, I had a Rincon and was a nice atv, it would outrun a grizzly on a parking lot from a dead standstill cause of the transmission didnt have any delay when you gassed it.Also it had a twelve and a half JE piston and cam, k&n, perf. exhaust. It took all this to outrun a griz. though. Well there is a draw back to the rincon, it has no low end the way it is geared, if you ever want to show up a rincon, get him in about two feet of mud and wear him out. Thats why I sold my rincon and got a 04 Grizzly and never regreted it. HMF full ex. sys. and 26 in. 589`s and its BAD. Oh yeah, anyone installing an HMF entire system, leave needle clip in middle, 165-170 main and about 3 turns out on air screw should put you right on jetting.
 
1 - 2 of 2 Posts
Top