Yamaha Grizzly Forum banner
1 - 4 of 4 Posts

· Premium Member
Joined
·
798 Posts
When I changed my oil I put in two quarts of oil. When I checked it, it was real close to the full mark.

My advise would be to check everything over again(ie..drain bolt) make sure maybe you did not spill enough to give you that reading and then slowly pour little at a time untill it starts showing on the stick and go from there,IMO.
 

· Registered
Joined
·
289 Posts
04 Grizz manual calls for 2.1 qts for oil and filter change, dealer did the first change and put in 2.6 qts, way over full, earlier ones must have had more capacity or the kid don't know how to read that changed the oil.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top