Problems with neutral light!
Join the discussion
Recommended Reading
-
Front driveshaft coupler removal??
DrivetrainI'm trying to remove couplers from engine side and diff side on 660. Both are being very stubborn! Any tricks? Book says the engine side is L/H thread....unless I'm reading it wrong. Doesn't say L/H thread for diff nut so I'm assuming it's R/H cut??- 1
- 391
-
660 carb not starting when cold... sometimes.
DrivetrainHi everyone, ive done a bit of research but thought id post this up as it may be similar to someone elses problem. Its a bit of a saga so grab a drink and get comfortable. Heres what happened: I only use my Grizzly 660 for fishing on the beach front. I think its a 2004 model? The quad has...- 12
- 7K
-
Display shows in and out of 4x4
DrivetrainWhen I am in 2 wheel drive driving down the street, my display shows 4 wheel drive on and off. I have cleaned the connectors. No change When I lock the diff, it sometimes acts like the motor is not running on all cylinders. I don't have a understanding on why this is happening. It never does...- 1
- 307
-
Shifter
DrivetrainI just joined the forum. A few weeks ago I bought a 2006 Yamaha Grizzly 660. Last week I couldn't get the shifter to go into Park so j left it in Neutral and turned off the engine. Yesterday I tried to start it but I wouldn't even turn over. The battery is fine. I cant ter it to go into Park. I...- 1
- 383
-
Rear axle mod!!!
DrivetrainOk, so I finally got a chance to get this mod done so I could show you what it is. It is a very simple concept. Alot of you haven't had your axles pop out, but you really don't want to. If they pop out in the mud or water, all that crap gets in the diff and the splines on the axle get all chewed...- 22
- 11K
Join now to ask and comment!